Description
2024 NEW PRODUCT
The Leofoto SA-X Series tripods are one of the most compact collapsed setups on the market with a perfectly balanced weight to strength ratio. The "X" version has a newly designed apex with a rosette connector for SA-X rifle heads AND a 3/8" mounting screw to attach any standard 3/8" head. The rosette connector provides an extremely stable connection between the tripod's apex and the base of the head. The angle stop design has also been improved from the standard pull tab to a knurled bar which allows the user to adjust the angles with only one hand as opposed to two. The SA-X Series offers unparalleled versatility, built as a hunter’s companion who also enjoys long days on the range, but most requested by military, law enforcement, competitive shooters or those simply looking for one of the most compact and reliable shooting supports on the market. The SA-X Series tripods offer maximum rigidity, capable of supporting non-traditional shooting positions with a heavy load capacity. These tripods feature three angle stop positions to increase shooting capabilities and a compact design which maintains a small footprint, creating a tripod setup which is extremely easy to pack and carry on the go.
-
New "X" Version Apex Design: Rosette Connector AND 3/8" Mounting Stud
- New "X" Version Angle Stop: Allows for one handed angle adjustment
- Threaded 1/4” accessory socket on the side of the apex to provide the perfect placement of a strap or magic arm for holding anything from an umbrella, phone or even a kestrel
- Tripods must occasionally withstand tremendous bending and torsion loads. It is crucial that the leg angle stops and all other structural joints are well supported. Leofoto offset leg joints fully support the leg angle stops allowing loads to be transferred straight through the strongest members of the tripod. This also means the tripod is more compact when collapsed
- Large diameter rubber feet keep leg sidewalls from touching the ground even at the lowest settings and makes positive contact with the ground at virtually any angle
- Hard anodized, CNC-machined 6061 T6 aluminum hardware
- Toray Carbon Fiber Leg Tubes
- Included: Leofoto Tripod Case
*The Leofoto SA-X series tripods use a new mounting system that can accept both SA-X specific rosette mounting heads as well as any standard 3/8" compatible head.
| SA-324CX | Rosette + 3/8” X Angle Stops Tubes: 32/28/25/22mm |
Max. height: 1444mm / 56.85in Min. height: 90mm / 3.54in Folded length: 527mm / 20.75in Leg Section: 4 Weight: 1.43kg / 3.15lb Max load: 25kg / 55.12lb |
| SA-324CLX | Rosette + 3/8” X Angle Stops Long Ver. Tubes: 32/28/25/22mm |
Max. height: 1639mm / 64.53in Min. height: 101mm / 3.98in Folded length: 578mm / 22.8in Leg Section: 4 Weight: 1.50kg / 3.31lb Max load: 25kg / 55.12lb |
| SA-363CX | Rosette + 3/8” X Angle Stops Long Ver. Tubes: 36/32/28mm |
Max. height: 1597mm / 62.87in Min. height: 106mm / 4.17in Folded length: 700mm / 27.56in Leg Section: 3 Weight: 1.80kg / 3.97lb Max load: 35kg / 77.16lb |
| SA-364CX | Rosette + 3/8” X Angle Stops Tubes: 36/32/28/25mm |
Max. height: 1539mm / 60.59in Min. height: 87mm / 3.43in Folded length: 571mm / 22.4in Leg Section: 4 Weight: 1.80kg / 3.97lb Max load: 30kg / 66.14lb |
| SA-402CX | Rosette + 3/8” X Angle Stops Tubes: 40/36mm |
Max. height: 1532mm / 60.3in Min. height: 119mm / 4.69in Folded length: 918mm / 36.15in Leg Section: 2 Weight: 1.98kg / 4.37lb Max load: 50kg / 110.234lb |
| SA-403CX |
Rosette + 3/8” X Angle Stops Tubes: 40/36/32mm |
Max. height: 1487mm / 58.54in Min. height: 94mm / 3.7in Folded length: 668mm / 26.3in Leg Section: 3 Weight: 2.10kg / 4.63lb Max load: 50kg / 110.234lb |
| SA-404CLX |
Rosette + 3/8” X Angle Stops Long Ver. Tubes: 40/36/32/28mm |
Max. height: 1729mm / 68.07in Min. height: 93mm / 3.66in Folded length: 633mm / 24.92in Leg Section: 4 Weight: 2.30kg / 5.07lb Max load: 40kg / 88.18lb |
Customer Reviews
Compared to the original / older versions, the legs are very stiff, and the lockup on the base-to-leg connection can be tightened down to feasibly move the tripod while using tripod rear.
It also works out great for air travel!
Paired this with the MH-50 ball head. Absolutely love the combo. More versatile than ever imagined.
Machining fit and finish is perfect. Well worth the $
Tempted to try the ln 404c however I have achieved my goal of steadiness from this combination.
